| |
Routers > Cheetah > WE-Series
| |
|
|
|
| |
|
|
Click to Download PDF 
QuStream’s Cheetah WE series is our top-of-the-line compact routing switchers with intelligence multi-format conversion and diagnostic features. It offers a 64x64 in a 6RU and a 128x128 in a mare 11RU. The Cheetah WE series comes standard with Ethernet control using our Viewport™ diagnostic software and support for the matrix redundant cross-point option. For risk-free routing requirements in live on-air situations or other critical distribution facilities, a redundant cross-point can be added to swap over in case of failure. | The Cheetah WE series supports all output and fiber options, it also supports analog video, telemetry, and AES/EBU audio signal format.
64WE (6RU up to 64x64) |
|
The Cheetah 64WE begins with the basic needs of routing HD, SDI, ASI and digital signals ranging from 3Mbps to 1.5Gbs. The 64WE frames add exceptional value by including the same control and diagnostic features found in all the Cheetah routing switchers. This 6RU frame comes standard with Ethernet control using our powerful Viewport™ diagnostic software. Control is offered in either our 3500PRO-LE, 3500PRO or PERC2000 to provide maximum control and configuration, the most cost effective control system in the industry. For critcal routing requirements in live on-air situations or other critical distribution facilities, our exclusive redundant crosspoint can be added to allow crosspoint swap-over in case of failure. This feature, normally found in larger and expansive routing switchers, is now offered as an option in our basic configuration to allow event the most budget minded facilities the same peace of mind.
|
| |
- |
Frame types : 64WE (6RU up to 64x64) |
| |
- |
Supports HD, SDI, ASI, and analog video from 3Mbps up to 1.5Gbs |
| |
- |
With system control application (3500PRO-LE, 3500PRO or PERC2000) |
| |
- |
Hot swappable cards for on-air maintenance |
| |
- |
Supports network connectivity with Viewport™ diagnostics software |
| |
- |
Serial port of RS232 and RS422 available |
| |
- |
Supports SNMP network management |
| |
- |
Support optional cards : HD-to-SDI downconverter, digital to composite analog video conversion, dual ouput, redundant cross-point, fiber input and output, and more | | |
|
Input Options
|
|
Analog to Digital Input Conversion (NEW!)
|
| |
- |
Convert legacy analog sources to SD video without external plug-in required |
| |
- |
Supports up to 16 channels of NTSC/PAL analog video |
| |
- |
Seamlessly converts each analog input signal to SDI digital video |
| |
- |
Frame sync available as an option for any or all input channels | |
|
HD Multi-Rate Input
|
| |
- |
Supports up to 16 channels for HD or multi-rate video |
| |
- |
Supports from 3Mbs up to 1.5Gbs bandwidth |
| |
- |
Automatic cable equalization up to 100m |
| |
- |
Compliant with SMPTE 259M or 292M standards | |
|
SDI/ASI Input
|
| |
- |
Supports up to 16 channels for SDI or ASI signals |
| |
- |
Supports from 3Mbs up to 540Mbs bandwidth |
| |
- |
Automatic cable equalization up to 300m |
| |
- |
Compliant with SMPTE 259M-A, B, C and D | |
|
HD Fiber Multi-Rate Input
|
| |
- |
Supports up to 16 channels of HD/SDI or multi-rate signals |
| |
- |
Compliant SMPTE 259M or 292M standard |
| |
- |
Operates with either single or multi mode fiber |
| |
- |
SFP (Small Form Factor Pluggable) modules supporting 1310nm wave length | |
|
Coarse Wave Division Multiplexing (CWDM) – Cheetah V16 Input
|
| |
- |
Supports up to 16 video channels of 1.5Gbs bandwidth each |
| |
- |
Supports HD, SDI and multi-rate signals from 3Mbs up to 1.5Gbs |
| |
- |
Modules are multiplexed wavelength from 1310nm to 1610nm |
| |
- |
Fiber signal are de-muxed from a single fiber cable at distances up to 5Km | |
|
Analog Video Input
|
| |
- |
Supports up to 16 video channels of NTSC/PAL analog input |
| |
- |
Supports bandwidth up to 50MHz |
| |
- |
Capable of distributing AES/EBU 75ohm digital audio | |
|
Analog High Level Video Input
|
| |
- |
Supports up to 16 video channels with sync levels up to +/- 5V ground reference |
| |
- |
Applications such as for telemetry or other sine wave type where critical high level video paths must be distributed |
|
Output Options
|
|
HD to SD Down-Conversion Output Card (NEW!)
|
| |
- |
Convert HD video signals to SD video output for use by legacy SD devices |
| |
- |
Supports up to 16 video channels of 1.5Gbs bandwidth each |
| |
- |
Supports SMPTE 259M reclocking |
| |
- |
Outputs allow configuration for either 4:3 or 16:9 SD monitor | |
|
HD Fiber Output
|
| |
- |
Supports up to 16 channels of HD/SD or multi-rate signal |
| |
- |
Supports SMPTE 259M or 292M standard |
| |
- |
Operates with either single or multi mode fiber |
| |
- |
SFP (Small Form Factor Pluggable) modules supporting 1310nm wavelength |
| |
- |
Can be set to support reclocking or non-reclocking modes | |
|
HD Fiber Multi-Rate Output
|
| |
- |
Supports up to 16 channels of HD or multi-rate signals |
| |
- |
Supports from 3Mbs up to 1.5Gbs |
| |
- |
Supports both SMPTE 259M and 292M reclocking standards of 143Mbs to 540Mbs and 1.486Gbs |
| |
- |
Each channel can be selected to reclock or bypass using Viewport™ application | |
|
SDI/ASI Output
|
| |
- |
Supports up to 16 channels SD or ASI signals from 143Mbs to 540Mbs |
| |
- |
Supports SMPTE 259M-A, B, C and D |
| |
- |
Compliant with ASI |
| |
- |
Each channel can be selected to reclock or bypass using Viewport™ application | |
|
Coarse Wave Division Multiplexing (CWDM) – Cheetah V16 Output
|
| |
- |
Supports up to 16 video channels of 1.5Gbs bandwidth each |
| |
- |
Supports HD, SDI and multi-rate signals from 3Mbs up to 1.5Gbs |
| |
- |
SFP (Small Form Factor Pluggable) modules supporting multiplexed 1310nm to 1610nm wavelength | | |
128WE (11RU up to 128x128) |
|
The Cheetah 128WE begins with the basic needs of routing HD, SDI, ASI and digital signals ranging from 3Mbps to 1.5Gbs. The 128WE frames add exceptional value by including the same control and diagnostic features found in all the Cheetah routing switchers. This 11RU frame comes standard with Ethernet control using our powerful Viewport™ diagnostic software. Control is offered in either our 3500PRO-LE, 3500PRO or PERC2000 to provide maximum control and configuration, the most cost effective control system in the industry. For critcal routing requirements in live on-air situations or other critical distribution facilities, our exclusive redundant crosspoint can be added to allow crosspoint swap-over in case of failure. This feature, normally found in larger and expansive routing switchers, is now offered as an option in our basic configuration to allow event the most budget minded facilities the same peace of mind.
|
| |
- |
Frame types : 128WE (11RU up to 128x128) |
| |
- |
Supports HD, SDI, ASI, and digital video from 3Mbps up to 1.5Gbs |
| |
- |
Hot swappable cards for on-air maintenance |
| |
- |
Supports network connectivity with Viewport™ diagnostics software |
| |
- |
Serial port of RS232 and RS422 available |
| |
- |
Supports SNMP network management |
| |
- |
Support optional cards : HD-to-SDI downconverter, dual output, redundant cross-point, fiber input and output, and more | |
|
Input Options
|
|
HD Multi-Rate Input
|
| |
- |
Supports up to 16 channels for HD or multi-rate video |
| |
- |
Supports from 3Mbs up to 1.5Gbs bandwidth |
| |
- |
Automatic cable equalization up to 100m |
| |
- |
Compliant with SMPTE 259M or 292M standards | |
|
SDI/ASI Input
|
| |
- |
Supports up to 16 channels SD or ASI signals |
| |
- |
Supports from 3Mbs up to 540Mbs bandwidth |
| |
- |
Automatic cable equalization up to 300m |
| |
- |
Compliant with SMPTE 259M-A, B, C and D | |
|
HD Fiber Multi-Rate Input
|
| |
- |
Supports up to 16 channels of HD or multi-rate signals |
| |
- |
Compliant SMPTE 259M or 292M standard |
| |
- |
Operates with either single or multi mode fiber |
| |
- |
SFP (Small Form Factor Pluggable) modules supporting 1310nm wave length | |
|
Coarse Wave Division Multiplexing (CWDM) – Cheetah V16 Input
|
| |
- |
Supports up to 16 video channels of 1.5Gbs bandwidth each |
| |
- |
Supports HD, SDI and multi-rate signals from 3Mbs up to 1.5Gbs |
| |
- |
Modules are multiplexed wavelength from 1310nm to 1610nm |
| |
- |
Fiber signal are de-muxed from a single fiber cable at distances up to 5Km | |
|
Output Options
|
|
HD to SD Down-Conversion Output Card (NEW!)
|
| |
- |
Convert HD video signals to SD video output for use by legacy SD devices |
| |
- |
Supports up to 16 video channels of 1.5Gbs bandwidth each |
| |
- |
Supports SMPTE 259M reclocking |
| |
- |
Outputs allow configuration for either 4:3 or 16:9 SD monitor | |
|
HD Fiber Output
|
| |
- |
Supports up to 16 channels of HD/SD or multi-rate signal |
| |
- |
Supports SMPTE 259M or 292M standard |
| |
- |
Operates with either single or multi mode fiber |
| |
- |
SFP (Small Form Factor Pluggable) modules supporting 1310nm wavelength |
| |
- |
Can be set to support reclocking or non-reclocking modes | |
|
HD Fiber Multi-Rate Output
|
| |
- |
Supports up to 16 channels of HD or multi-rate signals |
| |
- |
Supports from 3Mbs up to 1.5Gbs |
| |
- |
Supports both SMPTE 259M and 292M reclocking standards of 143Mbs to 540Mbs and 1.486Gbs |
| |
- |
Each channel can be selected to reclock or bypass using Viewport™ application | |
|
SDI/ASI Output
|
| |
- |
Supports up to 16 channels SD or ASI signals from 143Mbs to 540Mbs |
| |
- |
Supports SMPTE 259M-A, B, C and D |
| |
- |
Compliant with ASI |
| |
- |
Each channel can be selected to reclock or bypass using Viewport™ application | |
|
Coarse Wave Division Multiplexing (CWDM) – Cheetah V16 Output
|
| |
- |
Supports up to 16 video channels of 1.5Gbs bandwidth each |
| |
- |
Supports HD, SDI and multi-rate signals from 3Mbs up to 1.5Gbs |
| |
- |
SFP (Small Form Factor Pluggable) modules supporting multiplexed 1310nm to 1610nm wavelength |
| |
|
|
|
| |
|
| |
|